-
November 6th, 2001, 06:04 PM
#1
Inactive Member
I found some Accord Hatchback Front Suspension...but I was told those calipers and rotors are the exact same as Type-R's...and I was wondering if they'd fit my GSR Knuckles???
Can anybody give me the Honda-perf something link...Honda Hybrid Page. I think the upgrade stuff is on their.
------------------
-
November 6th, 2001, 06:13 PM
#2
Inactive Member
-
November 6th, 2001, 06:13 PM
#3
Inactive Member
Here you go:
www.hybrid.honda-perf.org
Good luck
------------------
1991 Civic 4dr
ZC
Zdyne Ecu
Si tranny
Thermal R&D exhaust
Iceman
Chikara header
Weapon R Circuit Pro
KYB AGX's
Powerslot Rotors
AEM/Nissin Pads
Going B16 soon
-
November 6th, 2001, 06:37 PM
#4
Inactive Member
damn, we posted that at the exact same minute 
haha.
------------------
tahitiangreen91hatchsi
www.marked001.com
under construction
[email protected]
illadelphia, PA
-
November 6th, 2001, 06:41 PM
#5
-
November 6th, 2001, 11:15 PM
#6
Inactive Member
WHat? You did the upgrade!! How? What was the winning combination?
------------------
-
November 7th, 2001, 05:50 AM
#7
-
November 7th, 2001, 02:41 PM
#8
Inactive Member
Yeah but I meant the Type-R setup though. In comparision to the Accord HB Calipers and Rotors...is the prelude setup that large though.
------------------
-
November 12th, 2001, 08:23 PM
#9
Inactive Member
Sorry PC was meshed up pretty bad so no internet for a couple of days......
The Prelude rotors are exactly the same size as the SiR (10,3") but they are WAY thicker!
The ITR (or accord aerodeck) calipers fit perfectly onto the SiR (EX) knuckle and just looking at this setup compared to stock SiR you do not have to be a gearhead to figure out this setup just rocks!
BTW using ITR rotors will actually require using the ITR hubs.....they fit VERY good in the front but the rear ones just won't fit the trailing arm... so forget it.....
BTW 2 my Polish friend has finished his b16a1 to b18c6 swap and I will post this soon on my site......
------------------
http://crxfiles.hondapowered.com
-
November 12th, 2001, 08:27 PM
#10
Inactive Member
Sorry PC was meshed up pretty bad so no internet for a couple of days......
The Prelude rotors are exactly the same size as the SiR (10,3") but they are WAY thicker!
The ITR (or accord aerodeck) calipers fit perfectly onto the SiR (EX) knuckle and just looking at this setup compared to stock SiR you do not have to be a gearhead to figure out this setup just rocks!
BTW using ITR rotors will actually require using the ITR hubs.....they fit VERY good in the front but the rear ones just won't fit the trailing arm... so forget it.....
BTW 2 my Polish friend has finished his b16a1 to b18c6 swap story and I will post this soon on my site......
------------------
http://crxfiles.hondapowered.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks